Numerical Analysis of the Behavior of A New Aeronautical Alloy(Ti555-03)Under the Effect of A High-Speed Water Jet  

加关注

作  者:I.Ben Belgacem L.Cheikh E.M.Barhoumi W.Khan W.Ben Salem 

机构地区:[1]Laboratoire de Génie Mécanique,Ecole Nationale d’Ingénieurs de Monastir,Universitéde Monastir,5000 Monastir,Tunisie [2]Institut Préparatoire aux Etudes d’Ingénieur de Monastir,Universitéde Monastir,5000 Monastir,Tunisie [3]Department of Electrical and Computer Engineering,College of Engineering,Dhofar University,211 Salalah,Oman [4]University of Waterloo,Waterloo,Ontario N2L 3G1,Canada [5]Institut Supérieur des Arts et Métiers de Mahdia,Universitéde Monastir,5000 Monastir,Tunisie

出  处:《中国海洋工程:英文版》2019年第1期114-126,共13页China Ocean Engineering

基  金:financially supported by the University of Monastir(Tunisia).

摘  要:In this paper,we present a numerical simulation of a water jet impacting a new aeronautical material Ti555-03 plate.The Computational Fluid Dynamics(CFD)behavior of the jet is investigated using a FV(Finite Volume)method.The Fluid–Structure Interaction(FSI)is studied using a coupled SPH(Smoothed Particle Hydrodynamics)-FE(Finite Element)method.The jets hit the metal sheet with an initial velocity 500 m/s.Two configurations which differ from each other by the position(angle of inclination)of the plate relatively to the axis of revolution of the jet inlet are investigated in this study.The objective of this study is to predict the impact of the fluid produced at high pressure and high speed especially at the first moment of impact.Numerical simulations are carried out under ABAQUS.We have shown in this study that the inclination of the titanium alloy plate by 45°stimulates the phenomenon of recirculation of water.This affects the velocity profile,turbulence and boundary layers in the impact zone.The stagnation zone and the phenomenon of water recirculation are strongly influenced by the slope of the plate which gives a pressure gradient and displacement very important between the two configurations.Fluctuations of physical variables(displacement and pressure)prove the need for a noise and vibratory study.These predictions will subsequently be used for the modeling of the problem of an orthogonal cut in a high-speed machining process assisted by high-pressure water jet.

关 键 词:Titanium alloy(Ti555-03) CFD TURBULENCE ABAQUS Smoothed Particle Hydrodynamics(SPH) Fluid Structure Interaction(FSI) 

分 类 号:P[天文地球]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象